userrights

finishProcess 	= 0x0001 ,  // finish assembly processing (without waiting)

clearProcess = 0x0002, // clear all tightening results on assembly go to first Job

startJob = 0x0004, // start current Job (is available only in WorkflowState::WaitJobStart) finishJob = 0x0008, // finish current Job processing and set WorkflowState::WaitJobStart skipJob = 0x0010, // finish current Job processing and go to next Job clearJob = 0x0020, // clear all tightening results on current Job and set WorkflowState::WaitJobStart

skipRundown = 0x0040, // set current operation to NOK and go to next operation clearBolt = 0x0080, // set current Bolt to NOT_PROCESSED startDiag = 0x0100, // enable start diagnostic job selectRundown = 0x0200, // select Job / Bolt in view or on image userLogon = 0x0400, // user logon pauseJob = 0x0800, // pause Job processNOK = 0x1000, //continue processing after NOK result CCW = 0x2000, // CCW manualInput = 0x4000, // manual input in start view (added for LUA trace log only) unmountJob = 0x8000, // unmount Job switchTool = 0x10000, // switch between alternative and standard tool teachToolPos = 0x20000, // teach Tool position waitFinishProcess = 0x40000, // finish assembly processing normally (wait for completion)